Home / Augers For Excavators 18-30T
  • Augers For Excavators 18-30T - Rcy 3d
  • Augers For Excavators 18-30T - Rcy 3d
  • Augers For Excavators 18-30T - Rcy 3d
  • Augers For Excavators 18-30T - Rcy 3d
  • Augers For Excavators 18-30T - Rcy 3d
  • Augers For Excavators 18-30T - Rcy 3d

Augers For Excavators 18-30T

Quantity
ADD TO CART
BUY IT NOW
  • Detail

    Digga's range of drilling augers for 18-30t excavators are the ultimate in performance, quality and cost effectiveness.

    Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Completely manufactured and assembled by Digga, using only the highest grade materials and strictest quality control.

    Fitted with Digga / Eaton bell motors with integrated pressure relief valve and input housing. The innovative design allows the gearbox to go down the hole to maximize drilling depth without extensions.

    Available in Single Speed Std, low pressure (for machines with 3000 psi), Two Speed, and Two Speed low pressure (for machines with 3000 psi). Want to install Screw Anchors with your Drive? Absolutely, but to ensure full warranty protection, the addition of our patented ECV "Energy Control Valve" ensures complete protection against pile ‘flickback’ damaging your motor.

    Single Speed Features:
    • Compact high torque Digga manufactured gearbox
    • Digga designed Eaton motor with integrated pressure relief valve eliminating the need for bulky valve blocks while reducing many potential leak points
    • 2 Piece shaft design ensures maximum side load ratings without increasing load on bearings
    • Lifetime shaft pull out warranty
    • 5 year gearbox and 3 year motor warranty
    • Over 30 years design and manufacturing experience
    • Easily converted to a screw anchor drive with the addition of our patented 'anti kickback valve'
    Single Speed Specs 20DDS 25DDS 30DDS
    Max Torque (FT-LBS @ 3500 PSI) 19,488 24,514 30,771
    Recommended Flow (GPM) 26-60 26-60 26-60
    Motor Type Eaton Eaton Eaton
    Max Pressure (Do Not Exceed) 3500 PSI @ 33 GPM
    Max Flow (Do Not Exceed) 61 GPM @ 1800 PSI
    Max Horse Power 67 67 67
    Pressure Relief Valve Included Included Included
    Standard Output Shaft 100 mm Square 100 mm Square 100 mm Square
    Halo Optional Optional Optional
     
    Recommended Auger RC10 / RC11 RC10 / RC11 RC10 / RC11
    Max Auger Diameter (Clay / Shale)¹ 60" 60" 60"
    Max Auger Diameter (Earth)¹ 72" 72" 78"
    Weight (lbs.) 640 640 640
    Overall Length (in.) 45.3" 45.3" 45.3"
    Diameter (in.) 14" 14" 14"


    Single Speed Output
    20DDS 25DDS 30DDS
    OUTPUT SPEED OUTPUT TORQUE OUTPUT SPEED OUTPUT TORQUE OUTPUT SPEED OUTPUT TORQUE
    GPM RPM PSI FT-LBS GPM RPM PSI FT-LBS GPM RPM PSI FT-LBS
    26 14 1,500 8,352 26 11 1,500 10,506 26 9 1,500 13,188
    30 17 1,700 9,466 30 13 1,700 11,907 30 10 1,700 14,946
    34 19 1,900 10,579 34 15 1,900 13,308 34 12 1,900 16,704
    38 21 2,100 11,693 38 17 2,100 14,709 38 13 2,100 18,463
    42 23 2,300 12,807 42 18 2,300 16,109 42 15 2,300 20,221
    46 25 2,500 13,920 46 20 2,500 17,510 46 16 2,500 21,979
    50 28 2,700 15,034 50 22 2,700 18,911 50 17 2,700 23,738
    54 30 2,900 16,147 54 24 2,900 20,312 54 19 2,900 25,496
    58 32 3,200 17,261 58 25 3,200 21,713 58 20 3,200 27,254
    60 33 3,300 18,375 60 26 3,300 23,113 60 21 3,300 29,013
      3,500 19,488   3,500 24,514   3,500 30,771

    Digga's 2 Speed Augers are designed to suit excavators & skid steer loaders, truck cranes, front end loaders, wheeled loaders and backhoes with flows between 20-53gpm. We distribute our 2 Speed Drilling Augers throughout North America.

    Two-Speed Features:
    • Compact high torque Digga manufactured gearbox
    • Highly efficient design with less moving parts
    • Fitted with Eaton VIS motor
    • Integrated PRV (Pressure Relief Valve)
    • Extreme duty shaft locking system
    • Drive fits down the hole for greater digging depth
    • 5 year gearbox and 3 year motor warranty
    • Low maintenance
    2-Speed Specs 20DDT 25DDT 30DDT
    Max Torque (FT-LBS @ 3500 PSI) 20,309 25,027 31,489
    Recommended Flow (GPM) 20-53 20-53 20-53
    Motor Type Eaton Eaton Eaton
    Max Pressure (Do Not Exceed) 3500 PSI @ 39 GPM
    Max Flow (Do Not Exceed) 53 GPM @ 2600 PSI
    Max Horse Power 80 80 80
    Pressure Relief Valve Included Included Included
    Standard Output Shaft 100 mm Square 100 mm Square 100 mm Square
     
    Recommended Auger RC10 / RC11 RC10 / RC11 RC10 / RC11
    Max Auger Diameter (Clay / Shale)¹ 60" 60" 60"
    Max Auger Diameter (Earth)¹ 72" 72" 72"
    Weight (lbs.) 670 670 670
    Overall Length (in.) 45.9" 45.9" 45.9"
    Diameter (in.) 14" 14" 14"


    2-Speed Output
    20DDT 25DDT 30DDT
    OUTPUT SPEED OUTPUT TORQUE OUTPUT SPEED OUTPUT TORQUE OUTPUT SPEED OUTPUT TORQUE
    GPM HI TORQUE LOW SPEED LO TORQUE HIGH SPEED PSI HI TORQUE LOW SPEED LO TORQUE HIGH SPEED GPM HI TORQUE LOW SPEED LO TORQUE HIGH SPEED PSI HI TORQUE LOW SPEED LO TORQUE HIGH SPEED GPM HI TORQUE LOW SPEED LO TORQUE HIGH SPEED PSI HI TORQUE LOW SPEED LO TORQUE HIGH SPEED
    20 11 16 1,000 5,803 3,830 20 9 13 1,000 7,151 4,719 20 7 10 1,000 8,997 5,938
    30 16 24 1,500 8,704 5,745 30 13 19 1,500 10,726 7,079 30 10 15 1,500 13,495 8,907
    40 21 32 2,000 11,605 7,659 40 17 26 2,000 14,301 9,439 40 14 21 2,000 17,994 11,876
    53 28 42 2,500 14,506 9,574 53 23 34 2,500 17,876 11,798 53 18 27 2,500 22,492 14,845
      3,000 17,408 11,489   3,000 21,452 14,158   3,000 26,991 17,814
      3,500 20,309 13,404   3,500 25,027 16,518   3,500 31,489 20,783
    ¹Max/min drilling diameter (DIA) dependent on ground conditions. Guide is a recommendation only.
  • Customer Reviews
    No comments
BACK