Augers For Skid Steer Loaders 2.5-3.8T & Mini Excavators 3-5T
Quantity
-
Detail
Digga's range of drilling augers for 2.5 ton to 3.8 ton Skid Steer Loaders & 3 ton to 5 ton Excavators are the ultimate in performance, quality and cost effectiveness.
Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Completely manufactured and assembled by Digga, using only the highest grade materials and strictest quality control.
Fitted with Digga / Eaton bell motors with integrated pressure relief valve (auger drive for Mini Excavator) and input housing. The innovative design allows the gearbox to go down the hole to maximize drilling depth without extensions, eliminating downtime and minimizes maintenance, optimizing your returns.
Digga drilling augers are backed by industry leading warranty and local factory support.
Digga planetary augers are specially designed for Excavators for drilling and augering in most ground conditions. The addition of our patented "Energy Control Valve" turns the drilling drive into a screw anchor drive (auger drive for Mini Excavator).
Features:- Compact high torque Digga manufactured gearbox
- Digga designed Eaton motor
- Optional integrated pressure relief valve to eliminate the need for bulky valve blocks and reduce many potential leak points (auger drive for Mini Excavator)
- 2 Piece shaft design ensures maximum side load ratings without increasing load on bearings
- Lifetime shaft pull out warranty
- 5 year gearbox and 3 year motor warranty
- Over 30 years design and manufacturing experience
- Easily converted to a screw anchor drive with the addition of our patented 'anti kickback valve' (auger drive for Mini Excavator)
¹Max/min drilling diameter (DIA) dependent on ground conditions. Guide is a recommendation only.Specs 3DSS 4DSS 4DDS Torque (FT-LBS @ 3000 PSI) 2,829 3,275 3,583 Max Torque FT-LBS @ 3500 PSI 3,300 3,821 4,180 Recommended Flow (GPM) 10-30 10-30 10-36 Motor Type Eaton Eaton Eaton Max Pressure - Do Not Exceed 3500 PSI @ 16 GPM 3500 PSI @ 27 GPM Max Flow - Do Not Exceed 30 GPM @ 1800 PSI 42 GPM @ 3100 PSI Max Horse Power 34 34 55 Pressure Relief Valve Optional Optional Included Standard Output Shaft 2" Hex 2" Hex 2" Hex Halo Optional Optional Optional Recommended Auger A4 / RC4 A4 / RC4 A4 / RC4 Max Drilling Diameter (Clay / Shale)¹ 24" 24" 24" Max Drilling Diameter (Earth)¹ 30" 30" 40" Weight (lbs.) 123 125 180 Overall Length (in.) 25.9" 25.9" 29" Diameter (in.) 9.4" 9.4" 9.4"
3DSS 4DSS 4DDS Output Speed Output Torque Output Speed Output Torque Output Speed Output Torque GPM RPM PSI FT-LBS GPM RPM PSI FT-LBS GPM RPM PSI FT-LBS 10 33 1,500 1,414 10 28 1,500 1,638 8 22 1,500 1,791 12 39 1,700 1,603 12 34 1,700 1,856 13 32 1,700 2,030 14 46 1,900 1,792 14 39 1,900 2,074 17 43 1,900 2,269 16 52 2,100 1,980 16 45 2,100 2,293 21 54 2,100 2,508 18 59 2,300 2,169 18 51 2,300 2,511 25 65 2,300 2,747 20 65 2,500 2,357 20 56 2,500 2,730 29 75 2,500 2,986 22 72 2,700 2,546 22 62 2,700 2,948 34 86 2,700 3,225 24 78 2,900 2,735 24 67 2,900 3,166 38 97 2,900 3,463 26 85 3,100 2,923 26 73 3,100 3,385 42 108 3,100 3,702 28 91 3,300 3,112 28 79 3,300 3,603 3,300 3,941 30 98 3,500 3,300 30 84 3,500 3,821 3,500 4,180 -
Customer ReviewsNo comments