Specpoxy 3000 Astm 881 Compliant Hi-Mod, Gel Viscosity Epoxy

SpecPoxy 3000 is a two-component, moisture insensitive, high modulus, structural epoxy bonding gel.  Case comes with a nozzle for easy application.

Call for discount on bulk purchases (+1 (800) 342-3876)

SpecPoxy 3000 is 100% solids, solvent free, low odor, high-strength, and non-sag. VOC content= 0 grams/liter.

Application

• Anchoring bolts, dowels, and reinforcing steel.
• Vertical and overhead structural bonding and patching.
• Sealing cracks and setting injection ports.
• Suitable for use in concrete, block, brick, or stone.

Mixing Instructions

• Mix equal volumes of Part A and Part B for three minutes using a low-speed drill.
• Air, material, and surface temperatures must be at least 60°F prior to mixing and installation.

Surface Preparation

• Surfaces must be clean and structurally sound.
• Remove contaminants by sandblasting, mechanical abrasion, or hydro blasting.
• Ensure drilled holes are prepared by brushing and blowing out with oil-free compressed air.

Application Techniques

• Bonding: Apply SpecPoxy 3000 neatly into the substrate and ensure the glue line does not exceed 1/8″.
• Anchoring: For anchoring applications, ensure holes are drilled to the appropriate depth and diameter, and filled from the bottom up to avoid air pockets.

Shelf Life

• Store in original, tightly closed containers. Shelf life is two years from the date of manufacture when stored properly.

Test Data

• Initial Cure: 24 hours
• Final Cure: 7 days
• Compressive Strength (ASTM D695): 11,230 psi
• Compressive Modulus (ASTM D695): 326,500 psi
• Bond Strength (ASTM 882): 2 days – 2,460 psi; 14 days – 3,280 psi
• Elongation (ASTM D638): 1.3%
• Tensile Strength (ASTM D638): 7,210 psi
• Water Absorption (ASTM D570): <0.5%
• Heat Deflection (ASTM D648): 133°F
• Mix Ratio: 1 to 1
• Viscosity: Gel/Paste