OCM Mesh Form
Quantity
-
Detail
Permanent Galvanized Stay in Place Concrete Forming System
Applications for OCM Mesh Form are Pedestal Foundations; Retaining Walls; Steel Tower Foundations; Wind Force Power Generator Foundations; Under- ground beams, footings, pressure-proof panels, concrete stoppers, mat foundations and all concrete structures constructed on the ground.
Sheet Size
27” x 97”
Surface
18 Sq Ft/Sheet
Pallet/Ordering
250 Sheets/4500 Sq Ft per Skid
V-Ribs 8 per Sheet and 3/4” Deep and 3 7/8” on Center
Tie Wire Spacing
6”
Support Spacing (20” High Pour)
24” at 210 psf
Sheet Thickness
26 Ga (0.0217 Inch, Including Galvanizing)
Weight per Sq Ft
0.66 lbs.
Weight per Sheet
11.90 lbs. per Sheet
Installation Notes
OCM Mesh Form rule of thumb is to brace Mesh Form like you would a piece of plywood.
The use of rebar, strongbacks, walers, kickers, etc. (location, size and spacing) is similar to that for con- ventional forming methods per ACI 347, Guide to Formwork for Concrete.
Notes
- 4”-8” minimum lap between running OCM Mesh Form sheets.
- 2-rib minimum lap between stacked OCM Mesh Form sheets.
- Tie wire around rib and bracing is recommended.
- Bracing where sheets lap is also recommended.
- Attach OCM Mesh Form to bracing with wire, Staples, roofing nails or similar.
- North ribs to make 90 degree turns; ribs face into the concrete pour.
- Cut OCM Mesh Form sheets with a grinder, Cutoff saw, abrasive blade or tin snips.
- 4”-8” minimum lap between running OCM Mesh Form sheets.
-
Customer ReviewsNo comments